NEC ASPILA EX - Page 947

Program 80 : Basic Hardware Setup for System
80-03 : DTMF Tone Receiver Setup
Aspila EX Software Manual Programming 941
Default
Conditions
None
Feature Cross Reference
• Selectable Ring Tones
Telephone Programming Instructions
To enter data for Program 80-03 (DTMF Tone Receiver Setup):
1. Enter the programming mode.
2. 80 03
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
Item
No.
Item Type 1 Type 2 Type 3 Type 4 Type 5
01Detect Level00000
02Start delay time00000
03 Min. detect
level
10(-25dBm) 15(-30dBm) 10(-25dBm) 10(-25dBm) 10(-25dBm)
04 Max. detect
level
2 (-2dBm) 2 (-2dBm) 2 (-2dBm) 2 (-2dBm) 2 (-2dBm)
05 Forward twist
level
5 (6dBm) 5 (6dBm) 5 (6dBm) 5 (6dBm) 5 (6dBm)
06 Backward twist
level
0 (1dBm) 0 (1dBm) 0 (1dBm) 0 (1dBm) 0 (1dBm)
07 ON detect time 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms)
08 OFF detect time 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms)
80-03-01 PB Receiver 1
Detect level 0:0/-30
back
 ¯ select
80-03-nn PB Receiver 1
nnnnn
¬ ®