Program 11 : System Numbering
11-16 : Single Digit Service Code Setup
Aspila EX Software Manual Programming 509
11-16 : Single Digit Service C ode Setup
Description
Use Program 11-16 : Single Digit Service Code Setup to customize the one-digit Service Codes
used when a busy or ring back signal is heard. You can customize additional Service Codes in Programs
11-10 through 11-15. The following chart shows:
• The number of each code (01-10)
• The function of the Service Code.
• What type of telephones can use the Service Code
• The code’s default entry. For example, dialing 1 (code 03) when calling an extension will
switch the call from either a voice or signal call (depending on how it’s currently defined).
• Programs that may be affected by changing these codes.
If you change a Service Code, be sure to record your entry in the “New” column.
Input Data
Conditions
None
Feature Cross Reference
Refer to chart above.
Level:
Aspila EX
IN •Available.
Item
No.
Item Default New
Related
Program
01 Step Call No Setting
02 Barge In No Setting
03 Switching of Voice/Signal Call 1
04 Intercom Off Hook Signaling No Setting
05 Camp-On No Setting
06 DND/Call Forward Override No Setting
07 Message Waiting No Setting
08 Voice Over No Setting
09 Access to Voice Mail No Setting
10 STG All Ring Mode No Setting 16-01-05
To Next Page
Loading...
