Program 11 : System Numbering
11-10 : Service Code Setup (for System Administrator)
Aspila EX Software Manual Programming 493
11-10 : Service Code Setup (for System Admi nistrator)
Description
Use Program 11-10 : Service Code Setup (for System Administrator) to customize the Service
Codes for the System Administrator. You can customize additional Service Codes in Programs 11-11
through 11-16. The following chart shows:
• The number of each code (01-27)
• The function of the Service Code.
• What type of telephones can use the Service Code
• The code’s default entry. For example, dialing 724 (item 26) allows users to force a trunk line
to disconnect.
• Programs that may be affected with the changing the code.
If you change a Service Code, be sure to record your entry in the “New” column.
Input Data
Level:
Aspila EX
IN •Available.
Item
No.
Item Terminals Default New
Related
Program
01 Day / Night Mode Switching KTS, SLT 818 12-xx
20-07-01
02 Changing the Music on Hold Tone KTS 881 10-04
03 Setting the System Time KTS 828
04 Storing Common Abbreviated Dialing Numbers KTS 853
05 Storing Group Abbreviated Dialing Numbers KTS 854
06 Setting the Automatic Transfer for Each Trunk Line KTS 833
07 Canceling the Automatic Transfer for Each Trunk
Line
KTS 834
08 Setting the Destination for Automatic Trunk Transfer KTS 835
09 Charging Cost Display by Supervisor 771
10 Not Used - - - -
11 Entry of Credit for Toll Restriction 774
12 Night Mode Switching for Other Group KTS 718 12-xx
20-07-01
13 Not Used - - - -
14 Not Used - - - -
15 Not Used - - - -
To Next Page
Loading...
