Program 21 : Outgoing Call Setup
21-05 : Toll Restriction Class
662 Programming Aspila EX Software Manual
21-05 : Toll Restrictio n Class
Description
Use Program 21-05 : Toll Restriction Class to set the system’s Toll Restriction classes (1-15).
Input Data
Level:
Aspila EX
IN •Available.
Toll Restriction Class Number 1-15
Item
No.
Item Input Data Description
Related
Program
01 International call restric-
tion table
0...Unassigned
1...Assigned
This option assigns/unassigns the International
Call Restrict Table for the Toll Restriction
Class you are programming. Enter International
Call Restrict Table data in Program 21-06-01.
21-06-01
02 International call permit
code table
0...Unassigned
1...Assigned
This option assigns/unassigns the International
Call Permit Table for the Toll Restriction Class
you are programming. Enter International Call
Permit Table data in Program 21-06-02.
21-06-02
03 Restriction of Local Call 0... Disable
1... Enabled
This option enables/disables restriction for local
calls.
04 Maximum Number of
Digits Table Assignment
1-4: Table
0: Disable
Select the table (defined in 21-06-03) to be used
to determine the maximum number of digits
allowed for outgoing calls.
21-06-03
05 Common permit code
table
0: Unassigned
1: Assigned
It chooses whether the table set up by 21-06-04
is referred to, or not referred to.
21-06-04
06 Common restriction table 0: Unassigned
1: Assigned
It chooses whether the table set up by 21-06-05
is referred to, or not referred to.
21-06-05
07 Permit code table 1-4: Table
0: Disable
Set the tables 1-4 when referring to the table set
up by 21-06-06.
21-06-06
08 Restriction table 1-4: Table
0: Disable
Set the tables 1-4 when referring to the table set
up by 21-06-07.
21-06-07
09 Restriction for common
abbreviated dials
0... Does not
restrict
1... Following
restriction check
Use this option to enable/disable Toll Restric-
tion for Common Abbreviated Dialing num-
bers. If enabled, Common Abbreviated Dialing
numbers have the same restrictions as manually
dialed numbers.