Program 21 : Outgoing Call Setup
21-05 : Toll Restriction Class
Aspila EX Software Manual Programming 663
Default
Conditions
None
10 Restriction for group
abbreviated dials
0... Does not
restrict
1... Following
restriction check
Use this option to enable/disable Toll Restric-
tion for Group Abbreviated Dialing numbers. If
enabled, Group Abbreviated Dialing numbers
have the same restrictions as manually dialed
numbers.
11 Intercom Call Restriction 0...Disable
1...Enable
It chooses whether ICM incoming call is
restricted.
12 PBX Call Restriction 0...Disable
1...Enable
Use this option to set how the system Toll
Restricts calls over PBX trunks. If you enable
PBX Toll Restriction, the system begins Toll
Restriction after the PBX access code. The user
cannot dial a PBX extension. If you disable
PBX Toll Restriction, the system only restricts
calls that contain the PBX access code. The sys-
tem does not restrict calls to PBX extensions.
Refer to the PBX compatibility feature. Make
sure Program 21-05-04 (Maximum Number of
Digits Table Assignment) allows for PBX Toll
Call Dialing (normally 12 digits).
13 Restriction of tie calls 0...Disable
1...Enable
It chooses whether the toll restriction of the dial
set up by 34-08 is enabled or disabled.
34-08
Item No
12345678910111213
Class No. 1 000000000 0 000
Class No. 2 000011000 0 000
Class No. 3 110011000 0 000
Class No. 4 111011000 0 000
Class No. 5 111011001 0 000
Class No. 6 111011001 1 000
Class No. 7 111011001 1 100
Class No. 8 111111111 1 110
: ::::::::: : :::
Class No. 15 111111111 1 110
Item
No.
Item Input Data Description
Related
Program
To Next Page
Loading...
