Program 22 : Incoming Call Setup
22-02 : Incoming Call Trunk Setup
688 Programming Aspila EX Software Manual
22-02 : Incomin g Call Trunk Setup
Description
Use Program 22-02 : Incoming Call Trunk Setup to assign the incoming trunk type for each
trunk. There is one item for each Night Service Mode.
Input Data
Conditions
(A.) When connecting to T1 trunks, after changing Program 22-02-01 to match the telco’s con-
nected T1 service type, the T1 cable or the T1 PCB must be unplugged and then reconnected
in order for the T1 PCB to sync.
Feature Cross Reference
• Central Office Calls, Answering
Level:
Aspila EX
IN •Available.
Trunk port number 1-200
Day/Night
Mode
Incoming Type Default Description
Related
Program
1-8 0- Normal
1- VRS (Second dial tone if no VRS installed)
2- DISA
3- DID
4- DIL
5- E&M Tie line
6- Delayed DID
7- ANI/DNIS
0 Use this option to set the feature
type for the trunk you are pro-
gramming.
14-04
To Next Page
Loading...
