NEC ASPILA EX - ARS;F-Route Selection for Time Schedule

Program 44 : ARS/F-Route Setup
44-04 : ARS/F-Route Selection for Time Schedule
914 Programming Aspila EX Software Manual
44-04 : ARS/F- Route Selection for Time Schedule
Description
Use Program 44-04 : ARS/F-Route Selection for Time Schedule to assign each ARS/F-Route
Selection number to an ARS/F-Route table number for each ARS/F-Route time mode. There are 8
time modes for ARS/F-Route Access.
Input Data
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS)/F-Route
Telephone Programming Instructions
To enter data for Program 44-04 (ARS/F-Route Selection for Time Schedule):
1. Enter the programming mode.
2. 44 04
3. Enter the number of the item you want to program.
4. Select the ARS/F-Route Selection number to be programmed by pressing the FLASH or the
VOLUME
p or VOLUME q keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
Level:
Aspila EX
IN •Available.
ARS/F-Route Selection Number 1-500
ARS/F-Route Time Mode ARS/F-Route Table Number Default
1-8 0-500 0
44-04-01 Select No 1
F-Route Mode1=0
back
 ¯ select
44-04-nn Select No nnn
nnnnn
¬ ®