Program 35 : SMDR and Account Code Setup
35-02 : SMDR Output Options
834 Programming Aspila EX Software Manual
Conditions
None
Feature Cross Reference
• Station Message Detail Recording
08 Incoming Call
Enable this option (1) to have the SMDR
report include incoming calls. If you disable
this option (0), incoming calls will not print.
0=Not Displayed
1=Displayed
1
09 Extension Number or Name
Set this option (1) to have the SMDR report
include extension numbers. Set this option (0)
to have the SMDR report include extension
names.
0=Name
1=Number
1
10 ALB Output 0=Not Displayed
1=Displayed
0
11 Walking Toll Restriction Table Number 0=Not Displayed
1=Displayed
1
12 DID Table Name Output 0=Not Displayed
1=Displayed
0
13 CLI Output When DID to Trunk 0=Not Displayed
1=Displayed
14 Date
Determine whether the date should be dis-
played on SMDR reports. This option must be
set to “0” if the trunk name is set to be dis-
played in Program 35-02-03.
0=Not Displayed
1=Displayed
0
15 CLI / DID Number Switching 0=CLI
1=DID calling number
0
16 Trunk Name or Received Dialed Number
Determine how the SMDR should print
incoming calls on ANI/DNIS or DID trunks. If
set to (1), ANI/DNIS trunks can print DNIS
digits. If set to (0) trunk names are printed
instead.
0=Trunk port name
1=Received dialed
number
0
Item
No.
Item Input Data Default
To Next Page
Loading...
