Program 92 : Copy Program
92-01 : Copy Program
1062 Programming Aspila EX Software Manual
Note: Copy Program is applicable only for the following programs.
Trunk Port Base
Trunk Group Base
Extension Base
Program No. Program Name Note
14-01 Trunk Basic Data Setup Copy all data except Trunk Name (Item 01).
14-02 Analogue Trunk Data Setup
14-04 Behind PBX Setup
14-08 Music on Hold Source for Trunks
14-09 Conversation Recording Destination for Trunk
21-03 Trunk Group Routing for Trunks
21-12 ISDN Calling Party Number Setup for Trunk
22-02 Incoming Service Type Setup
22-03 Trunk Ring Tone Setup
22-05 IRG Assignment for Normal Ring Trunk
22-08 Second IRG Setup for unanswered DIL / IRG
31-05 Incoming Ring Tone Audible on External
Speaker
Program No. Program Name Note
35-03 SMDR Port Assignment for Trunk Group
Program No. Program Name Note
15-01 Extension Basic Data Setup (include Virtual
Extension)
Copy all data except extension name (item 01).
15-02 Multi-Line Telephone Basic Data Setup
15-03 Single Line Telephone Basic Data Setup
15-04 PHS Terminal Basic Data Setup Copy Item 11, 12 and 13.
15-06 Trunk Access Map for Extension
15-07 Programmable Function Key
15-08 Incoming Virtual Extension Ring Tone Setup
15-09 Virtual Extension Ring Assignment
To Next Page
Loading...
