Fax Machine Compatibility
194 Features Aspila EX Software Manual
Related Features
Central Office Calls, Placing / Central Office Calls, Placing
The fax machine should be programmed with incoming and outgoing access options.
Direct Inward Line
Use DILs to route system trunks directly to fax machines installed as extensions.
External Alarm Sensors
External alarm sensors also use PGDAD PCB sensor circuits.
One-Touch Calling
One-Touch Keys provide one-button transfer to fax machines installed as extensions.
Ring Groups
Ring Groups can also be used to direct calls to the fax machine.
Single Line Telephones - Analogue/Digital
Set up incoming and outgoing access for the fax telephone line.
Voice Response System (VRS)
When using a VRS, set up a single digit dialing code which can be used to transfer callers to
the fax machine.
Voice Mail
When using voice mail, you can provide the digit to be dialed to transfer the call to the ana-
logue port which is connected to the fax machine.
Operation
To transfer a call to the fax machine:
System Phone
1. Press HOLD.
You hear Transfer dial tone.
2. Dial fax machine extension number.
If you have Automatic On Hook Transfer and the extension you call is busy, pressing
CALL returns you to the call.
If the called extension doesn’t answer, you can dial another extension number or press
CALL to return to the call.
3. Hang up.
If you don’t have Automatic On Hook Transfer, you must press the TRF Soft Key to
Transfer the call.
Single Line Set
1. Hookflash.
2. Dial fax machine extension number.
If the called extension doesn’t answer, you can dial another extension number or
hookflash to return to the call.
3. Hang up.
To Next Page
Loading...
