EasyManua.ls Logo

NEC ASPILA EX - Page 212

NEC ASPILA EX
1098 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Flexible System Numbering
198 Features Aspila EX Software Manual
Conditions
(A.) Programming follows a telephone’s extension number, not the port number in most cases. If
you relocate a phone, you may need to change additional programming.
(B.) If the extension numbering plan is changed from ‘2xx’ to ‘1xx’, and you would like to consec-
utively press two DSS keys without toggling the hookswitch, Program 11-16-05 must be
removed. If not, pressing the second DSS key will actually change voice/ringing call to the
first extension.
(C.) Since making changes in Program 11-01 does not automatically make any other changes in
any other program, changing the number plan after the system is in operation may cause prob-
lems in the following programs:
(D.) Any feature which requires dialing a code or extension number can be affected.
Default Setting
Extensions are numbered consecutively (Program 11-02 and 11-04) from:
200 (port 001) to 499 (port 299)
Refer to Table 6, “System Number Plan/Capacities,” on page 41 for the system’s default number-
ing plan.
Programming
•11-01-01 : System Numbering
Customize the system’s internal (Intercom) numbering plan.
•11-02-01 : Extension Numbering
Assign extension numbers to extension ports. The telephone’s programming identity follows
the port number - not the extension number.
•11-09-01 : Trunk Access Code
Assign the single-digit trunk access code (normally 9) for ARS/Trunk Group Routing.
•11-10-01 : Service Code Setup (for System Administrator)
11-11-01 : Service Code Setup (for Setup/Entry Operation)
11-12-01 : Service Code Setup (for Service Access)
11-13-01 : Service Code Setup (for ACD)
11-14-01 : Service Code Setup (for Hotel)
11-15-01 : Service Code Setup, Administrative (for Hotel)
Customize the Service Codes.
•11-16-01 : Single Digit Service Code Setup
Assign the Single Digit (post-dialing) Service Codes.
11-01 Type 2 (Extension Number) 11-01 Type 1 (Service Codes)
11-02 11-08 15-12 30-03 11-10 11-13 15-14 2902
11-04 11-17 16-01-01 11-11 11-14 21-11 2905
11-06 15-01-01 15-14 11-12 11-15 30-03
11-07 15-07 21-11

Table of Contents

Other manuals for NEC ASPILA EX

Related product manuals