Line Preference
234 Features Aspila EX Software Manual
Programming
•14-05-01 : Trunk Groups
For Auto-Answer of Non-Ringing Lines, assign trunks to trunk groups. This is part of Trunk
Group Routing programming.
•14-06-01 : Trunk Group Routing
For Auto Answer of Non-Ringing Lines, program the Trunk Group Routing table. Auto
Answer uses this table to determine the answer sequence for ringing calls.
•14-07-01 : Trunk Access Map Setup
For Outgoing Line Preference and Auto-Answer of Non-Ringing Lines, set up the Trunk
Access Maps (1-200).
•15-01-02 : Basic Extension Data Setup - Outgoing Trunk Line Preference
Enable (1) or disable (0) Outgoing Trunk Line Preference for extensions.
•15-02-09 : System Telephone Basic Data Setup - Ringing Line Preference for Intercom Calls
Enable Idle (0) or Ringing (1) Line Preference for Intercom calls. See the table below for
interaction.
•15-02-10 : System Telephone Basic Data Setup - Ringing Line Preference for Trunk Calls
Enable Idle (0) or Ringing (1) Line Preference for trunk calls. See the table below for interaction.
Note: Program 22-01-01 sets Intercom (0) or trunk (1) call priority.
Program
Ringing
Intercom
Call
Ringing
Trunk
Call
Lifting the handset
15-02-09
(Intercom
Preference)
15-02-10
(Trunk
Preference)
0 0 X X
Seizes idle line appearance.
0 0 X -
Seizes idle line appearance.
0 0 - X
Seizes idle line appearance.
01XX
If Program 22-01-01 is 1, answers ring-
ing trunk.
If Program 22-01-01 is 0, seizes idle
line appearance.
01X-
If Program 22-01-01 is 1, seizes idle
line appearance.
If program 22-01-01 is 0, seizes line
appearance,
01-X
Answers ringing trunk.
1 0 X X
Seizes idle line appearance.
1 0 X -
Answers ringing line appearance.
1 0 - X
Seizes idle line appearance.
11XX
If Program 22-01-01 is 1, answers
ringing trunk.
Intercom call then rings second line
appearance. If Program 22-01-01 is
0, answers Ring line appearance.
11X-
Answers ringing Intercom call
(Line appearance).
11-X
Answers ringing trunks.
To Next Page
Loading...
