Message Waiting
254 Features Aspila EX Software Manual
Conditions
(A.) Reminder messages require a DSP daughter board for VRS messages.
Default Setting
Enabled.
Programming
•15-07-01 : Programming Function Keys
Assign a function key for Message Waiting (code 38).
•20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
•20-13-07 : Class of Service Options (Supplementary Service) - Message Waiting
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to leave
Messages Waiting.
•24-02-05 : System Options for Transfer - Message Wait Ring Interval Timer
For SLTs without message waiting lamps, this timer determines the amount of time between
intermittent ringing. If this timer is set to '0' then the system rings once.
•80-01-01 : Service Tone Setup - Message Wait Dial Tone
If the default tone is not acceptable for the Message Wait Dial Tone, a new tone can be assigned.
Related Features
Handsfree Answerback/Forced Intercom Ringing
When a user responds to a Message Waiting, the system does not cancel the Message Waiting
indication if the called party uses Handsfree Answerback. The system cancels the indication
only if the called party lifts the handset or presses SPK.
Hotel/Motel
With the Hotel/Motel set up, an employee with a system phone can send a Message Waiting
to a room telephone if allowed in system programming.
Programmable Function Key
A Message Waiting key simplifies this feature’s operation.
Single Line Telephones
The intermittent ringing or stutter dial tone options may be used to indicate voice mail mes-
sages for single line sests which do not have a Message Waiting lamp.
Voice Response System
Reminder messages require a DSP daughter board for Voice Response System (VRS).
Voice Mail
Telephone-to-telephone Message Waiting works when the voice mail is installed.
The MW LED may be used to indicate voice mail messages if there is no extension number
assigned to the voice mail key in system programming.
Operation
To leave a Message Waiting:
1. Call busy or unanswered extension.
To Next Page
Loading...
