Message Waiting
256 Features Aspila EX Software Manual
Operation (Cont’d)
To cancel the Messages Waiting you have left at a specific extension:
1. At system phone, press idle CALL key.
OR
At single line telephone, lift handset.
2. Dial 871.
3. Dial number of extension you don’t want to have your messages.
4. Hang up.
To check your messages:
1. Press CHECK
2. Dial 841.
You can have any combination of the message types in the table below on your phone.
3. Press VOL
s or VOL t to scroll through your display.
4. When you find the message you want to answer, press CALL1. You’ll either:
• Go to your Voice Mail mailbox.
• Listen to the new General Message.
• Automatically call the extension that left you a Message Waiting.
Single Line Telephones Without Message Waiting Lamps:
With VRS message only:
1. Lift handset.
2. After programmed delay, the extension user hears the VRS message 'You have a message'.
3. Listen for dial tone.
With special dial tone only:
1. Lift handset.
The system provides the special Message Wait dial tone immediately.
With VRS and special dial tone:
1. Lift handset.
2. After the programmed delay, the extension user hears the VRS message "You have a message".
The system provides the special Message Wait dial tone immediately.
If you see. . . You have. . .
VOICE MESSAGE
n MESSAGE
New messages in your Voice Mail
mailbox
CHECK MESSAGE
VRS GENERAL MESSAGE
A General message in Voice Mail that has
not been heard.
CHECK MESSAGE
(name)
Message Waiting requests left at your
phone by your co-workers.
To Next Page
Loading...
