Programmable Function Keys
Aspila EX Software Manual Features 299
Related Features
Abbreviated Dialing/One-Touch Calling
Abbreviated Dialing and One-Touch Calling also offer quick access to calls and features.
Direct Station Selection (DSS) Console
Programming a 110-button console requires separate programming. Refer to this feature for
more details.
Operation
To change the function of a General Function programmable key:
1. Press idle CALL key.
2. Dial 851.
3. Press the key you want to program.
4. Enter the 2-digit key function, any additional information needed for the key and press HOLD.
Available functions are 00-99 (refer to chart) and line keys 001-200.
To undefine a key, enter 00.
To change the function of an Appearance Function programmable key:
1. Press idle CALL key.
2. Dial 852.
3. Press the key you want to program.
4. Enter the 3-digit key function and any additional information needed for the key.
Available functions are *00-*99 (refer to chart) and line keys 001-200.
To undefine a key, enter 000.
When a key is programmed using service code 852, that key cannot be programmed
with a function using the 851 code until the key is undefined (000). For example with a
Park Key programmed by dialing 852 + *04 must be undefined by dialing 000 before it
can be programmed as a Voice Over key by dialing 851 + 48.
To check the function of a programmable key:
1. Press CHECK.
2. Press the programmable key.
The programmed function displays.
To Next Page
Loading...
