Tandem Trunking (Unsupervised Conference)
340 Features Aspila EX Software Manual
Programming
Tandem Trunking Method A - Tandem Trunking from Conference
•10-07-01 : Conversation Record Circuits
The number of circuits assigned as Conversation Record circuits limits the number of avail-
able Conference circuits. Make sure there are circuits available for Conference.
•14-01-04 : Basic Trunk Data Setup - Transmit Gain Level for Conference and Transfer Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
•14-01-05 : Basic Trunk Data Setup - Receive Gain Level for Conference and Transfer Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
•14-01-13 : Basic Trunk Data Setup - Loop Supervision
For each trunk that should be able to participate in a tandem call, enter 1.
•15-07-01 : Programming Function Keys
(Optional) Assign a function key for Transfer (code 06).
•20-06-01 : Class of Service for Extensions
Assign a Class of Service (1-15) to an extension.
•20-13-08 : Class of Service Options (Supplementary Service) - Conference
In an extension’s Class of Service, enable (1) or disable (0) the extension’s ability to initiate a
Conference.
•20-13-10 : Class of Service Options (Supplementary Service) - Barge In Mode
In an extension’s Class of Service, set whether an extension should be able to Barge In to a
call and talk (1) or just monitor the call (0).
•20-11-14 : Class of Service Options (Hold/Transfer Service) - Trunk-to-Trunk Transfer
Disable (0) the Trunk-to-Trunk Transfer Restriction option.
Tandem Trunking Method B - Tandem Trunking on Hang up
•10-07-01 : Conversation Record Circuits
The number of circuits assigned as Conversation Record circuits limits the number of avail-
able Conference circuits. Make sure there are circuits available for Conference.
•14-01-04 : Basic Trunk Data Setup - Transmit Gain Level for Conference and Transfer Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
•14-01-05 : Basic Trunk Data Setup - Receive Gain Level for Conference and Transfer Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
•14-01-13 : Basic Trunk Data Setup - Loop Disconnect Supervision
For each trunk, enter 1 to enable loop supervision.
•15-07-01 : Programming Function Keys
Assign a function key for Transfer (code 06).
•20-06-01 : Class of Service for Extensions
Assign a Class of Service (1-15) to an extension.
•20-07-11 : Class of Service Options (Administrator Level) - Forced Trunk Disconnect
In an extension’s Class of Service, enter 1 to enable Forced Trunk Disconnect. This allows the
extension to disconnect an Unsupervised Conference in progress (initially set up using Method B).
•20-13-08 : Class of Service Options (Supplementary Service) - Conference
In an extension’s Class of Service, enable (1) or disable (0) the extension’s ability to initiate a
Conference.
•20-13-10 : Class of Service Options (Supplementary Service) - Barge In Mode
In an extension’s Class of Service, set whether an extension should be able to Barge In to a
call and talk (1) or just monitor the call (0).
To Next Page
Loading...
