Trunk Group Routing
364 Features Aspila EX Software Manual
Related Features
Automatic Route Selection (ARS)
Dialing 9 activates ARS, overriding trunk group routing.
Central Office Calls, Placing
Instead of using Trunk Group Routing, an extension user can place a trunk call by:
• Pressing a line key
• Dialing a trunk service code
• Pressing a trunk group key (refer to the Trunk Group feature)
• Dialing a trunk group service code (refer to the Trunk Group feature).
Data Communications / Direct Inward System Access (DISA) / Tie Lines
DISA (Program 25-10) and tie lines (Program 34-03) have separate Trunk Group Routing
programs.
Dial Tone Detection
Refer to this feature for the specifics on how the system handles Dial Tone Detection.
Programmable Function Keys
Programmable Function Keys simplify placing calls using Trunk Group Routing.
Ringing Line Preference
The system uses Trunk Group Routing programming (Program 14-06) when setting up Ring-
ing Line Preference.
Trunk Groups
Use trunk group programming to set the order in which users access trunks within a specific
trunk group.
Operation
To place a call using Trunk Group Routing:
1. At system phone, press idle CALL key.
OR
At single line telephone, lift handset.
2. Dial 9.
3. Dial number.
OR
1. At system phone, press Trunk Group Routing key (PGM 15-07 or SC 852: *05).
Also see the “Loop Keys” feature.
2. Dial number.
To Next Page
Loading...
