NEC ASPILA EX - Page 503

Program 11 : System Numbering
11-11 : Service Code Setup (for Setup/Entry Operation)
Aspila EX Software Manual Programming 497
16 Force Ringing of Incoming Intercom Calls KTS 823 20-09-05
20-02-12
17 Programmable Function Key Programming (Dialing
851 Service Code)
KTS 851 15-07
11-11-38
18 BGM On/Off KTS 825
19 Key Touch Tone On/Off KTS 824
20 Change Incoming CO and ICM Ring Tones KTS 820 15-02
21 Check Incoming Ring Tones KTS 811
22 Extension Name Programming KTS 800 15-01
23 Second Call for DID/DISA/DIL KTS 799
24 Change Extension Class of Service
Allows an extension user to change the COS of
another extension. Must be allowed in Program
20-13-28.
KTS 177 20-13-28
25 Automatic Transfer Setup for Each Extension Group KTS, SLT 702 20-11-17
24-05
26 Automatic Transfer Cancellation for Each Extension
Group
KTS, SLT 703
27 Destination of Automatic Transfer Each Extension
Group
KTS 704 20-11-17
24-05
28 Delayed Transfer for Every Extension Group KTS, SLT 705 20-11-17
24-05
24-02-08
29 Delayed Transfer Cancellation for Each Extension
Group
KTS, SLT 706 20-11-17
30 DND Setup for Each Extension Group KTS, SLT 707
31 DND Cancellation for Each Extension Group KTS, SLT 708
32 Not Used - - - -
33 Dial Block KTS, SLT 700
34 Temporary Toll Restriction Override KTS, SLT 875 21-07
35 Pilot Group Withdrawing KTS, SLT 750
36 Toll Restriction Override KTS, SLT 763 21-14
37 Adjusting Ring Volume KTS 829
38 Programmable Function Key Programming (Dialing
852 Service Code)
KTS 852 15-07
11-11-17
Item
No.
Item Terminals Default New
Related
Program