NEC ASPILA EX - Page 569

Program 15 : Extension Basic Setup
15-02 : Multi-Line Telephone Basic Data Setup
Aspila EX Software Manual Programming 563
04 Abbreviated Dialing DIAL Key
Control
Use this option to control the
function of the extension’s DIAL
key when used with Abbreviated
Dialing. The DIAL key can
access either the Common or
Group Abbreviated Dialing num-
bers.
0- Common and individual
Abbreviated Dialing
1- Group Abbreviated Dialing
0
05 Transfer Key Operation Mode
Use this option to set the operat-
ing mode of the extension’s
CONF (TRF) key. The keys can
be for Call Transfer, Serial Call-
ing or Flash. When selecting the
Flash option (selection 2), refer
also to Program 81-01-14.
0- Transfer
1- Series call
2- Flash
0
06 Hold Key Operating Mode
Use this option to set the function
of the keyset Hold key. The Hold
key can activate normal Hold,
Exclusive Hold or Park.
0- Normal Hold
1- Exclusive Hold
2- Park
0
07 Automatic Hold for CO Lines 0- Enable (Hold)
1- Disable (Disconnect)
1
08 Pre-select / One-touch Key 0- Pre-select
1- One-touch
1
09 Ringing Line Preference for
Intercom Calls
Use this option to select between
Idle and Ringing Line Preference
for Intercom calls.
0- off
1- on
1
10 Ringing Line Preference for
Trunk Calls
Use this option to select between
Idle and Ringing Line Preference
for trunk calls.
0- off
1- on
1
11 Callback Automatic Answer
Use this option to enable or dis-
able automatic answer for Call-
back. If enabled, extension
automatically answers Callback
ring when user lifts the handset. If
disabled, use must press line
appearance key to answer Call-
back.
0- off
1- on
1
Item
No.
Item Input Data Default
Related
Program