Program 20 : System Option Setup
20-13 : Class of Service Options (Supplementary Service)
Aspila EX Software Manual Programming 631
10 Barge In Mode
Enables the extension’s Barge In to be speech mode (0) or
Monitor mode (1).
0-Off
1-On
00
11 Room Monitor, Initiating Extension
Enable/disable an extension’s ability to initiate Room
Monitor
0-Off
1-On
00
12 Room Monitor, Extension Being Monitored
Enable/disable an extension’s ability to be monitored
0-Off
1-On
00
13 Continued Dialing
Enable/disable an extension’s ability to use Continued
Dialing which allows DTMF signal sending while talking
on extension.
0-Off
1-On
10
14 Department Calling
Enable/disable an extension’s ability to call a Department
Group.
0-Off
1-On
10
15 Barge In, Initiate
Enables/disables Barge In at initiating extension.
0-Off
1-On
00
16 Barge In, Receive
Blocks/allows Barge In at the receiving extension.
0-Off
1-On
00
17 Barge In Tone/Display
Use this option to enable/disable the Barge In tone. If
enabled, callers hear an alert tone and their display indi-
cates the Barge In when another extension barges into their
conversation. If disabled, there is no alert tone or display
indication.
0-Off
1-On
00
18 Programmable Function Key Programming (General
Level)
Enables/disables an extension’s ability to program their
General function keys using Service Code 851 (by
default). (Refer to Program 20-07-10 for Service Code
852.)
0-Off
1-On
10
19 Selectable Display Messaging
Enables/disables an extension’s ability to use Selectable
Display Messaging
0-Off
1-On
10
20 Account Code/Toll Restriction Operator Alert
Enables/disables operator alert when an extension improp-
erly enters an Account Code or violates Toll Restriction.
0-Off
1-On
10
21 Extension Name
Enables/disables an extension’s ability to program its name
0-Off
1-On
10
22 Called Party Status
Display the detail state of called party
0-Off
1-On
00
Item
No.
Item
Input
Data
Default
COS 01-14 COS 15
To Next Page
Loading...
