NEC ASPILA EX - Page 661

Program 21 : Outgoing Call Setup
21-01 : System Options for Outgoing Calls
Aspila EX Software Manual Programming 655
Conditions
None
Feature Cross Reference
• Central Office Calls, Placing
Telephone Programming Instructions
To enter data for Program 21-01 (System Options for Outgoing Service):
1. Enter the programming mode.
2. 21 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
12 Dial 911 Routing Without Trunk Access
If enabled (1), an extension user can dial 911
without first dialing a trunk access code or
pressing a line key. If disabled (0), an exten-
sion user must dial a trunk access code (e.g.,
9) or press a line key before dialing 911.
0 = Trunk Access Code
Required
1 = Trunk Access Code
Not Required
1
13 Alarm Ring Timer (E911)
Use this option to sset the duration of the
E911 Alarm Ring Time. If set for 0, the E911
Alarm rings for 60 seconds and then stops.
0-64800 (Sec.) 0
14 Forced Account Code Inter-digit Timer
The system waits this interval for a user to
enter a Forced Account code.
0-64800 (Sec.) 3
21-01-01
TRK_Routing 0:Prior
back
 ¯ select
21-01-nn
nnnnn
¬ ®
Item
No.
Item Input Data Default Related Program