Analogue Communications Interface (ACI)
66 Features Aspila EX Software Manual
Default Setting
No PGDAD modules programmed.
Programming
• 10-07-01 : Conversation Record Circuits
Assign the number of conversation record circuits.
• 11-06-01 : ACI Extension Numbering
Assign extension numbers to ACI software ports (1-96). This lets system users dial ACI ports
directly. Select a number outside of the normal extension number range.
• 11-08-01 : ACI Group Pilot Number
Assign pilot numbers to ACI groups (1-16). When a user dials the pilot number, they reach an
available ACI software port within the group.
• 15-12-01 : Conversation Recording Destination for Extensions
Use this option to assign the ACI Call Recording destination on a per extension basis. The
destination can be an ACI port’s extension number (assigned in Program 11-06) or an ACI
Department Group pilot number (assigned in Program 11-08).
• 33-01-01 : ACI Port Type Setup
Set each ACI software port (1-96) for input (1) or input/output (2). Use input ports for Music
on Hold sources. Use output ports for External Paging/ringer control.
• 33-02-01 : ACI Department Calling Group
Assign ACI software ports (1-96) to ACI Department Groups (16). This lets ACI callers con-
nect to ACI software ports by dialing the group’s pilot number (set in Program 11-08).
PGDAD/ACI Interface Specifications
Relay Contacts
Maximum Contact Ratings 24 V DC @ 500 mA
120 V AC @ 250 mA
Audio/Music Input
Input Impedance 47 K Ohms @ 1 K Hz
Input Level Nominal -10dBm
Audio/Paging Output
Output Impedance 600 Ohms @ 1 K Hz
Maximum Output + 3 dBm
To Next Page
Loading...
