– 107 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICE FEATURES
08
NOTE 1: When CM08>268=0 (restricted), set 0 (station base) by CM08>269.
NOTE 2: CM08>281, 282, 283, 284, 286, 287 are required for Hotel printer.
Continued on next page
: Initial Data
BASIC SERVICE FEATURE SETTING DATA
268 Call termination to My Line while the station user makes a call
with a Sub line or trunk line on D
term
NOTE 1
0
1
Restricted
Allowed
269 Busy indication on BLF of large type ATTCON, DSS Console
or D
term
by station base or extension base NOTE 1
0
1
Station base
Extension base
270 Voice Call when calling D
term
set to Voice First from single line
telephone or D
term
without LCD
0
1
Not provided (Busy Tone)
To provide
271 Voice Call when calling D
term
set to Voice First from Attendant
Console
0
1
Not provided (Busy Tone)
To provide
274 Line lockout indication on DSS Console 0
1
Available
Not available
280 Time Display for Message Reminder/Message Waiting (Sys-
tem/Individual) on D
term
0
1
24-Hour (Military format)
12-Hour
281 Maid Identification number used for Maid Status
NOTE 2
0
1
Available
Not available
282 Message “RING ON OK” is printed out when wake up call
starts NOTE 2
0
1
Not printed
To print
283 Message “STATION BUSY” is printed out when the station is
busy on Wake Up call NOTE 2
0
1
Not printed
To print
284 Message “CONNECTION BLOCK” is printed out when Wake
Up call is unsuccessful NOTE 2
0
1
Not printed
To print
286 Message “STATION ANSWER” is printed out when the sta-
tion answer Wake Up call NOTE 2
0
1
Not printed
To print
287 Message “STATION NO ANSWER” is printed out when the
station does not answer Wake Up call NOTE 2
0
1
Not printed
To print
289 Room Cutoff 0
1
Not Allowed
To allow
CM08
To Next Page
Loading...
