NEC UNIVERGE NEAX 2000 IPS - [Cma8] Ccis Routing Label Assignment

– 623 – NWA-008844-001 Rev.5.0
91ch3007.fm
COMMAND CODE
TITLE:
CCIS ROUTING LABEL ASSIGNMENT
A8
FUNCTION:
This command is used to assign a destination office for a message to be transferred (e.g. service infor-
mation) and the Common Channel Handler (CCH) which will accommodate the message.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
NOTE: A maximum of 256 DPCs per system can be assigned.
ST
EXE++ +
+
A8
2ND DATA
DE
1ST DATA
(5 digits) (1 digit)
++
DE
: Initial Data
1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00001
16367
NOTE
Destination Point Code (DPC) sent
from distant office assigned by
CMA7 Y=02
0
7
NONE
CCH0
CCH7
No data
CM06 Y=07
CMA7 Y=02
~ ~ ~
CMA8