NEC UNIVERGE NEAX 2000 IPS - [Cmdd03] Office Number Assignment

– 870 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
OFFICE NUMBER ASSIGNMENT
DD03
FUNCTION:
This command is used to assign the office number of calling party/center office for Centralized Billing-
CCIS when using PN-AP00-B/PN-AP00-D with MRCA program.
[Series 3300]
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE++ +
+
DD03
2ND DATA
DE
1ST DATA
(2 digits) (1-4 digits)
++
DE
NOTE: If using a leading digits of 0 and 0 is required to print at the SMDR terminal, assign “A”
for each leading 0 to be printed. If the leading digits 0 is not required to print at the SMDR
terminal, assign “0”.
1ST DATA
2ND DATA
DATA FUNCTION
55 Office number of calling party for Centralized Billing-CCIS.
The office number is output to SMDR when the office number of
calling party is not sent from the local office.
NOTE
0-9999: Local Office No. of calling
party
56 Office number of center office for Centralized Billing-CCIS
NOTE
0-9999: Center Office No.
JULY/01/2006
CMDD03