– 382 – NWA-008844-001 Rev.5.0
91ch3004.fm
COMMAND CODE
TITLE:
FUNCTION OF MP RS-232C PORT
40
FUNCTION:
This command is used to assign the function of the RS-232C ports on the MP card.
The MP card has two RS-232C ports, which are used for the following purpose.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
PORT LOCATION
NUMBER
PURPOSE CONNECTOR
Port 0 Built-in SMDR
Local MAT
MCI
RS0 connector on the MP card
Port 1 Remote Maintenance using external modem or built-in
modem of MP card
Built-in SMDR
MCI
RS1 connector on the MP card
ST EXE++ ++40YY
DATA
DE
PORT LOCATION NUMBER
(0/1) (1-8 digits)
++ DE
CM40
To Next Page
Loading...
