NEC UNIVERGE NEAX 2000 IPS - [Cme4] Station Service Status Display

– 717 – NWA-008844-001 Rev.5.0
91ch3008.fm
COMMAND CODE
TITLE:
STATION SERVICE STATUS DISPLAY
E4
FUNCTION:
This command is used for readout the station service status.
[Series 3700 R12.2]
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST + + +E4YY DE
STATION NUMBER
+ DE
(1-8 digits)
Y READOUT DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00 Readout service status
A for each station
abcdefgh a: Terminal connection status
0: Connected (D
term
/D
term
IP)
1: Not connected (D
term
/D
term
IP)
E: Readout error
_: Off-line/other than D
term
/D
term
IP
b: Make busy
0: Not set
1: Set
E: Readout error
c: Line status
0: Idle
1: Busy
E: Readout error
_: Off-line
d: Call Forwarding-All Calls
0: Not set
1: Set
e: Call Forwarding-Busy Line
0: Not set
1: Set
f : Call Forwarding-Don’t Answer (No Answer)
0: Not set
1: Set
Continued on next page
JULY/01/2006
CME4