NEC UNIVERGE NEAX 2000 IPS - [Cmad] Cs;Zt Calling Area;Pad Data Assignment

– 634 – NWA-008844-001 Rev.5.0
91ch3007.fm
COMMAND CODE
TITLE:
CS/ZT CALLING AREA/PAD DATA ASSIGNMENT
AD
FUNCTION:
This command is used to assign the calling area and PAD data for each CS/ZT.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE
++ ++
ADYY
SETTING DATA
DE
CS/ZT NUMBER
(3 digits) (2-12 digits)
++
DE
: Initial Data
NOTE: This command is effective only when WLAN terminal (MH220) is used in WLAN system.
Continued on next page
Y MEANING CS/ZT No.
SETTING DATA
DATA MEANING
00 Calling Area 000-255 XX Y ZZ
NONE
CCC
XX: Calling Area No. (00-31)
Y : Group No. (0-7)
ZZ : Group CS/ZT No. (00-31)
No data
Data clear
01 PAD Data
(CSI/Virtual CS/ZT-COT/LDT/
ODT/DID/IPT) NOTE
PAD
00
01
02
03
04
05
06
07
08
09
10
11
12
13
15
Transmitter/Receiver PAD (dB)
+: Gain
–: Loss
0/0
0/+3
0/+6
0/–3
+3/+3
+3/+6
+3/–3
–3/–3
+3/0
+6/0
–3/0
–3/0
0/–3
0/–6
0/0
JUNE/01/2007
CMAD