NEC UNIVERGE NEAX 2000 IPS - [Cm77] Station;Trunk;Cs;Zt;Attcon Name Assignment

– 543 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
STATION/TRUNK/CS/ZT/ATTCON NAME ASSIGNMENT
77
FUNCTION:
This command is used to assign the name of each station, trunk route, Cell Station (Zone Transceiver)
and ATTCON which is displayed on D
term
or Attendant Console.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
+ 77Y + +
STATION
++
+
NUMBER
DATA
(1-8 digits)
EXE
ST
DEDE
(1-32 digits)
TRUNK NAME
NUMBER
(2 digits)
CS/ZT
NUMBER
(3 digits)
ATTCON
NUMBER
(1 digit)
: Initial Data
Y STATION No./
TRUNK NAME No./
CS/ZT No./ATTCON No.
SETTING DATA
REMARKS
No. MEANING DATA MEANING
0 Station Name assign-
ment with character
code (for English)
X-XXXXXXXX: Station
number/
My Line
number
assigned
by CM10/
CM14/
Virtual
station
number
assigned
by CM11
XXX...X
NONE
Character Code
(Maximum 32 digits)
See Character Code
Table.
Page 546
No data
CM10/CM11/
CM14
CM08>255
1 Station Name assign-
ment with character
(for English)
X
X......X
NONE
Character
(Maximum 16 charac-
ters)
NOTE 1
No data
Continued on next page
~
JULY/01/2006
CM77