CHAPTER 2 PRECAUTION
– 31 – NWA-008844-001 Rev.5.0
91ch2001.fm
METHOD OF SETTING ON-LINE/OFF-LINE MODE
FOR MP CARD
• Setting Off-line mode
(1) Set SW3 on the MP card to “2” or “3”.
(2) Press SW1 on the MP card.
• Setting On-line mode
(3) Set SW3 on the MP card to “0”.
MP will reset automatically after SW3 is set to a 0.
For details, refer to the Installation Procedure Manual.
METHOD OF SETTING ON-LINE/OFF-LINE MODE
To Next Page
Loading...
