NEC UNIVERGE NEAX 2000 IPS - [Cme5] Station, Trunk Line Make Busy

– 720 – NWA-008844-001 Rev.5.0
91ch3008.fm
COMMAND CODE
TITLE:
STATION, TRUNK LINE MAKE BUSY
E5
FUNCTION:
This command is used to make busy any station or trunk in the software.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST EXE++ ++E5Y
DATA
DE
STATION/TRUNK
NUMBER (1 digit)
++ DE
: Initial Data
Y
STATION/TRUNK NUMBER SETTING DATA
REMARKS
No. MEANING DATA MEANING
0X
XXXXXXXX
Station number (1-8 digits) NOTE 1 0
1
Make busy set
In service
For LC and
DLC card
1 000
255
Trunk number NOTE 2 0
1
Make busy set
In service
For COT, LDT,
ODT and BRT
card
2 XXXXXXXX Z XXXXXXXX: ISDN Line Station
number
Z: 0 (B1 channel)
1 (B2 channel)
NOTE 3
0
1
Make busy set
In service
For ILC card
3 000
255
CS/ZT number 0
1
2
Make busy (forced)
Make idle
Make busy
(after calls finished)
For CS/ZT
NOTE 4
5 XX ZZ XX: LAN Interface number (00-31)
ZZ : IP-PAD channel (00-31)
[Series 3200 R6.2 (R6.2)]
0
1
Make busy set
In service
For IP-PAD
card
Continued on next page
~ ~
,
~
JULY/01/2006
CME5