– 710 – NWA-008844-001 Rev.5.0
91ch3008.fm
COMMAND CODE
TITLE:
CALLING NUMBER DEVELOPMENT DATA
DB
FUNCTION:
This command is used to assign the calling number development data for CALLER ID.
PRECAUTION:
Clearing all data in memory for calling number development (CMDB Y=90) is necessary before assign-
ing the calling number development data by CMDB and CMDC.
The development data by CMDB and CMDC are assigned toward the first CIR card (PN-4RSTC), which
has been assigned a minimum AP number. When providing multiple CIR cards, save the development
data and load them for the other CIR cards using a MAT. For detail procedure, refer to the Feature Pro-
gramming Manual.
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST EXE++ ++DBYY
2ND DATA
DE
1ST DATA
(1-4 digits) (1-14 digits)
++ DE
: Initial Data
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
00 Calling party’s name
assignment
0-1499 Calling Number
Development Table
number assigned
by CMDC
X...XXXX
(Maximum 14
characters)
NONE
CCC
Character Code
See Character Code
Table in CM77.
No data
Clear
01 Destination station
number for Day Mode
NOTE 1, NOTE 2
X...XXXX
(Maximum 12
digits)
NONE
CCC
Day Mode Destination station num-
ber (X=0-9)
No data
Clear
02 Destination station
number for Night
Mode
NOTE 1, NOTE 2
X...XXXX
(Maximum 12
digits)
NONE
CCC
Night Mode Destination station num-
ber (X=0-9)
No data
Clear
Continued on next page
NOVEMBER/15/2006
CMDB
To Next Page
Loading...
