– 855 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
BILLING SYSTEM DATA PARTIAL CLEAR FOR
PN-AP00-B WITH AP00 PROGRAM
D100
FUNCTION:
This command is used to clear the data related only to the designated Command Code among the system
data for billing and to assign “0” as the data when using PN-AP00-B with AP00 program.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
NOTE: Before use this command, make the PN-AP00-B card OFF LINE by switch setting as shown
below.
AP OFF LINE
ST
EXE
++ ++
D100 CCC
DE
DXXX
++
DE
Command Code of the data to be deleted
SW1
ON
SW1-4 should be set as follows;
ON : The AP No. is 04-15
OFF: The AP No. is 20-31
4
3
2
1
: Position to be set
CMD100
To Next Page
Loading...
