NEC UNIVERGE NEAX 2000 IPS - [Cmdd00] Smdr Functions (1);Do Not Disturb Group Set;Cancel

– 861 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
SMDR FUNCTIONS (1)/DO NOT DISTURB GROUP SET/CANCEL
DD00
FUNCTION:
This command is used to assign the Station Message Detail Recording (SMDR) functions and Do not
disturb group set/cancel when using PN-AP00-B/PN-AP00-D with MRCA program.
[Series 3300]
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE++ +
+
DD00
2ND DATA
DE
1ST DATA
(1-3 digits) (0/1)
++
DE
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
0 Send detail information of tandem calls to SMDR terminal 0 0 : Not sent
1: To send
1 Send detail information of tandem calls to SMDR terminal 1 0 : Not sent
1: To send
2 Send detail information of tandem calls to SMDR for Central-
ized Billing-CCIS
0: Not sent
1: To send
3 Local office or Center office for Centralized Billing-CCIS 0 : Local office
1 : Center office
4 Action when the memory for SMDR has overflowed (for SMDR
terminal 0)
0 : New data is stored by deleting the
oldest data
1 : No new data is stored
5 Action when the memory for SMDR has overflowed (for SMDR
terminal 1)
0 : New data is stored by deleting the
oldest data
1 : No new data is stored
6 Operation for displaying the totaled call charge of a individual
station
[For EU]
[Series 3900]
0 : Not available
1 : Available
Continued on next page
AP00 INITIAL
JUNE/01/2007
CMDD00