NEC UNIVERGE NEAX 2000 IPS - [Cm02] Setting of System Clock;Reading out of Daylight Saving Time

– 51 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
SETTING OF SYSTEM CLOCK/READING OUT OF DAYLIGHT
SAVING TIME
02
FUNCTION:
This command is used to assign system clock data (year, date and time). And this command is used to
read out of the daylight saving time.
PRECAUTION:
The system clock starts when is pressed.
ASSIGNMENT PROCEDURE:
(1) Setting of System Clock
(2) Reading out of Daylight Saving Time
EXE
ST
EXE
++ +
+
2ND DATA
DE
1ST DATA
(0-2) (4/6 digits)
++
DE02
ST
++
+
2ND DATA
DE
1ST DATA
(3)
++
DE02
DECEMBER/02/2005
CM02