NEC UNIVERGE NEAX 2000 IPS - [Cm36] Restriction Data for Tandem Connection

– 379 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
RESTRICTION DATA FOR TANDEM CONNECTION
36
FUNCTION:
This command is used to define restriction data for tandem connection within a system, for each combi-
nation of an incoming trunk route and an outgoing trunk route.
PRECAUTION:
Any incoming trunk route assigned to “No release signal” in CM35 Y=05, is restricted from tandem con-
nection.
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE
++ ++
36Y
DATA
DE
INCOMING
TRUNK
(0/1)
++
DE
ROUTE
(2 digits)
OUTGOING
TRUNK
ROUTE
(2 digits)
+
: Initial Data
Y
INCOMING
TRUNK ROUTE
OUTGOING
TRUNK ROUTE
SETTING
DATA
RELATED
COMMAND
000
63
00
63
0
1
Allow
Restricted
CM35 Y=05
~ ~
CM36