– 226 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION CLASS-2
13
FUNCTION:
The features for each station are to be designated by assigning Station Class-2 for each station number.
PRECAUTION:
(1) When assigning Station Class-2 to a D
term
by this command, enter “X-XXXXXXXX (My Line
number)” of FX-FXXXXXXXX, which is assigned by CM10/CM14, as the first data.
(2) When a station has been set as an FAX station (CM13 Y=07), the following limitations are applied
to that station.
• Periodic Time Indication tone is not given to the line.
• Override by other stations is restricted.
• Ringing interval is fixed to 1 second ON-2 seconds OFF.
• Call Waiting Answer-Called Side to be restricted by CM15 Y=44: 0.
(3) After setting CM13 Y=28, 33, system reset is required.
(4) The data for a Single Line station number, My Line number of a D
term
and Virtual Line station
number are shown in the table below.
×: To assign –: Not assigned
Y
STATION NUMBER
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 18 21 22 23
Single Line station number
(Assigned by CM10/CM14)
×××××××××××– ××××××××
D
term
My Line number
(Assigned by CM10/CM14)
××××××××– ××– ××××– × – ×
Virtual Line station number
(Assigned by CM11)
–––––––× –––×××××– × – ×
Continued on next page
JANUARY/20/2006
CM13
To Next Page
Loading...
