EasyManua.ls Logo

NEC UNIVERGE NEAX 2000 IPS - Page 249

NEC UNIVERGE NEAX 2000 IPS
1038 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 225 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION CLASS-1
12
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
90 Registered D
term
IP MAC
Address display/clear
X.....XXX
(12 digits)
0
CCC
NONE
MAC Address display
MAC Address automatic registration in Fixed Con-
nection Mode
[Series 3700 R12.2]
Clear
No data
NOTE 1: If you clear the registered D
term
IP MAC Address while the system is operating,
D
term
IP is reset even though it is connected.
NOTE 2: MAC Address automatic registration in Fixed Connection Mode should be executed
during the terminal logging in.
NOTE 3: Maximum 256 MAC Addresses can be registered in Fixed Connection Mode.
NOTE 4: This command has to be registered after assigning CM15 Y=480 2nd data “1” and
CM2B Y=00 in Fixed Connection Mode. If you do not that, “DATA ERROR” is dis-
played.
NOTE 5: Execute the system data backup by CMEC Y=6>0: 0 after this command registered.
When changing this data of terminals accommodated in a remote site, execute the
office data copy by CMEC Y=8 to the remote site.
NOTE 6: Confirm the registered MAC Addresses by CM12 Y=92.
91 Confirmation of Stations
controlled by AP00 card
[Series 3400]
000
503
NONE
Station number 000
Station number 503
Not controlled
CM12 Y=49
92 MAC Address registration
in Fixed Connection Mode
[Series 3700 R12.2]
X.....XXX
(12 digits)
CCC
NONE
MAC Address
Clear
No data
NOTE 1: Maximum 256 MAC Addresses can be registered in Fixed Connection Mode.
NOTE 2: This command has to be registered after assigning CM15 Y=480 2nd data “1” and CM2B Y=00 in
Fixed Connection Mode. If you do not that, “DATA ERROR” is displayed.
NOTE 3: When a MAC Address is entered during the terminal logging in wrongly, “DATA ERROR” is displayed.
When a MAC Address of the other terminals which is logging in is entered, “WAIT, BUSY NOW” is
displayed.
NOTE 4: Execute the system data backup by CMEC Y=6>0: 0 after this command registered.
When changing this data of terminals accommodated in a remote site, execute the office data copy by
CMEC Y=8 to the remote site.
~
~
JULY/01/2006
CM12

Table of Contents

Other manuals for NEC UNIVERGE NEAX 2000 IPS

Related product manuals