NEC UNIVERGE NEAX 2000 IPS - [Cmf2] Fp Memory Dump; [Cmf3] Fp Memory Read;Write

– 768 – NWA-008844-001 Rev.5.0
91ch3008.fm
COMMAND CODE
TITLE:
FP MEMORY DUMP
FP MEMORY READ/WRITE
F2, F3
FUNCTION:
These commands are used only for maintenance.
DO NOT USE these commands without the assistance of a NEC engineer.
ASSIGNMENT PROCEDURE:
CMF2: FP Memory Dump
CMF3: FP Memory Read/Write NOTE
NOTE: You must be extremely careful in using this command while the system is in service.
ST + + +F2 DE
YYXXXXX
+ DE
Address
YY
XXXXX: 00000-FFFFF (Address)
: 04-15, 20-31 (AP number)
Display XXXXX: YY YY YY YY
Designated
Address
Data of the designated address
Data of the designated address + 1
Data of the designated address + 2
Data of the designated address + 3
YY: 00-FF (Data)
+
DE
YYXXXXX
Address
+XX+
New Data
EXE
YY
XXXXX: 00000-FFFFF (Address)
ST + +F3 + DE
: 04-15, 20-31 (AP number)
CMF2, F3