NEC UNIVERGE NEAX 2000 IPS - [Cm76] Digit Conversion on DID Call

– 531 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
DIGIT CONVERSION ON DID CALL
76
FUNCTION:
This command is used to assign the data required for interpreting the dialed-in digits.
PRECAUTION:
(1) Digit Conversion on DID call is available when CM35 Y=18 is set to 0.
(2) The first digit in the first data field must be assigned, in CM20 Y=0-3, as a station number 801-
808 and 811-818.
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE++ +
+
76YY
2ND DATA
DE
1ST DATA
(1-8 digits) (1-32 digits)
++
DE
: Initial Data
Y
1ST DATA
2ND DATA
REMARKS
No. MEANING DATA MEANING
00 Number Conver-
sion Block No.
for Development
Table 0
X-XXXX:
DID number
000
999
NONE
Number Conversion Block No. 000
Number Conversion Block No. 999
No data
CM35 Y=12,
78, 170
Continued on next page
~ ~
CM76