NEC UNIVERGE NEAX 2000 IPS - [Cm44] External Equipment Starting Conditions

– 436 – NWA-008844-001 Rev.5.0
91ch3004.fm
COMMAND CODE
TITLE:
EXTERNAL EQUIPMENT STARTING CONDITIONS
44
FUNCTION:
This command is used to assign the relay circuit number of PN-DK00 or built-in External Equipment
Interface of MP card used for controlling external equipment.
PRECAUTION:
(1) For built-in External Equipment Interface of the MP card, assign 313 (card No. 31, circuit No. 3).
(2) MP built-in External Equipment Interface cannot be used for TAS indication control.
ASSIGNMENT PROCEDURE:
DATA TABLE:
+44+ +
CIRCUIT
++ +
NUMBER
DATA 1
(3 digits)
EXEST DEDE
(2 digits)
+
DATA 2
(2 digits)
CIRCUIT NUNBER
RELATED COMMAND REMARKS
NUMBER MEANING
XX Y XX: Card Number (00-31) of PN-
DK00
Y : Circuit Number (0-3)
313: Built-in External Equipment
Interface of MP card
CM10/CM14
Card number: E8XX
Continued on next page
CM44