– 211 – NWA-008844-001 Rev.5.0
91ch3002.fm
COMMAND CODE
TITLE:
STATION CLASS-1
12
FUNCTION:
The features for each station are determined by assigning Station Class-1 to each station number.
PRECAUTION:
(1) When assigning Station Class-1 to D
term
by this command, enter “X-XXXXXXXX (My Line
number)” of FX-FXXXXXXXX, which is assigned by CM10/CM14, as the first data.
Also when assigning to D
term
IP enter “X-XXXXXXXX (D
term
IP station number)” of FX-
FXXXXXXXX, which is assigned by CM14, as the first data.
(2) The data for Single Line station number, My Line number of D
term
, Virtual Line station number,
Automatic/Manual/Dial Intercom number, Loop Line number and ICI/OPR Line number, D
term
IP
station number are shown in the table on next page.
(3) After setting CM12 Y=17, system reset is required.
Continued on next page
CM12
To Next Page
Loading...
