NEC UNIVERGE NEAX 2000 IPS - [Cmd012] Station Group Number; [Cmd013] Station Group Number; [Cmd014] Station Group Number

– 834 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
STATION GROUP NUMBER
D012, D013, D014
FUNCTION:
CMD012 is used to assign a Group number to each station as the Charging Group. CMD013 and
CMD014 are used to divide the Charging Groups into Medium Group or Large Group.
By grouping the stations in this way, the sum of the detail and total bills for the stations belonging to
each Group can be printed out.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
• CMD012: For assigning a Group number to each station
NOTE: Assign Group number 128 to stations in which a Group number is not assigned.
• CMD013: For assigning a Medium Group number to each Group number
NOTE: Assign Group number 232 to a Group number which is not included in a Medium Group num-
ber.
Continued on next page
ST
EXE
++ +
+
D012/D013/D014
2ND DATA
DE
1ST DATA
(1-4 digits) (3 digits)
++
DE
1ST DATA 2ND DATA REMARKS
X-XXXX: Station number
(1-4 digits)
00-07 : ATTCON number
(2 digits)
000-128: Group number
1ST DATA 2ND DATA REMARKS
000-127: Group number assigned by
CMD012
200-232: Medium Group number
CMD012, CMD013, CMD014