NEC UNIVERGE NEAX 2000 IPS - [Cmd026] Route Index for Call Charge Development

– 845 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
ROUTE INDEX FOR CALL CHARGE DEVELOPMENT
D026
FUNCTION:
This command is used to assign a Development Table number for each outgoing trunk route.
PRECAUTION:
Although actual charging is not determined by the PBX, it is necessary to program this command and
CMD027 to get SMDR output.
ASSIGNMENT PROCEDURE:
DATA TABLE:
• For each Table Number assigned by this command, the charging method for each dialed digit is
assigned by CMD027 as shown below.
ST
EXE++ +
+
D026
2ND DATA
DE
1ST DATA
(1-2 digits) (3 digits)
++
DE
: Initial Data
1ST DATA 2ND DATA REMARKS
0-63: Outgoing Trunk Route No. 000 -511: Development Table No.
Table
No.
XXX
Route XX
Trunk Route No.
CMD026
Dialed Digits
CMD027
1
0
9
Charging Method
CMD026