– 844 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
CHARGING RATE ASSIGNMENT (2)
D025
Charging Rate per Metering Pulse
Charging Rate RT1, RT2 and RT3 are respectively applied to each of the ranges divided by Break Points
BP1 and BP2 for surcharge as shown below.
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
000000 First Charging Rate by Meter Pulse (RT1) 0 -9999: Call charge(
φ
) per meter
pulse
001000 Second Charging Rate by Meter Pulse (RT2)
002000 Third Charging Rate by Meter Pulse (RT3)
Call Start Call End
BP1 BP2
RT1 RT2 RT3
Meter pulse
CMD025
To Next Page
Loading...
