NEC UNIVERGE NEAX 2000 IPS - [Cmd033] Route Index for Call Development

– 851 – NWA-008844-001 Rev.5.0
91ch3009.fm
COMMAND CODE
TITLE:
ROUTE INDEX FOR CALL DEVELOPMENT
D033
FUNCTION:
This command is used to assign a Type of Call Development Table for each outgoing trunk route.
PRECAUTION:
This command and CMD034 must be assigned to get SMDR output.
ASSIGNMENT PROCEDURE:
DATA TABLE:
On the basis of each table number assigned by this command, the type of call to the dialed digits is as-
signed by CMD034 as shown below.
ST
EXE
++ +
+
D033
2ND DATA
DE
1ST DATA
(1-2 digits) (1-3 digits)
++
DE
: Initial Data
1ST DATA 2ND DATA REMARKS
0-63: Trunk Route number 0 -127: Type of Call Development
Table number
TRUNK ROUTE
ACCESS CODE
ROUTE XX
CMD033
0
1
2
9
Table
XX
Table
XX
0
1
2
TOLL
LOCAL TYPE OF
CALL
CMD034
CMD033