– 713 – NWA-008844-001 Rev.5.0
91ch3008.fm
COMMAND CODE
TITLE:
CALLING NUMBER DEVELOPMENT TABLE
DC
FUNCTION:
This command is used to assign the calling number development table number for CALLER ID, to each
calling number.
PRECAUTION:
Clearing all data in memory for calling number development (CMDB Y=90) is necessary before assign-
ing the calling number development data by CMDB and CMDC.
The development data by CMDB and CMDC are assigned toward the first CIR card (PN-4RSTC), which
has been assigned a minimum AP number. When providing multiple CIR cards, save the development
data and load them for the other CIR cards using a MAT. For details of the procedure, refer to the Feature
Programming Manual.
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE
++ ++DCYY
DEVELOPMENT
DE
CALLING
NUMBER TABLE No.
++
DE
(1-10 digits) (1-4 digits)
: Initial Data
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
00-63 Trunk Tenant number X...XXX Calling number
(Maximum 10 dig-
its)
0 -1499 Calling Number Development
Table number
CMDC
To Next Page
Loading...
