– 139 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
LAN INTERFACE ASSIGNMENT
0A
FUNCTION:
This command is used to provide LAN interface for accommodating D
term
IP or H.323 IP trunks/SIP
trunks.
PRECAUTION:
(1) LAN interface numbers which can be used by the system is 00-15 (Series 3200 R6.1 (R6.1) or
before) or 00-31 (Series 3200 R6.2 (R6.2) or later).
(2) LAN interface numbers should use 00-31 for H.323 IPT cards.
Maximum number of LAN interface numbers used for H.323 IPT cards is 8 per system.
Use the LAN Interface number 00-31.
(3) In the Remote PIM over IP system, maximum 32 LAN Interface number can be assigned for IP-
PAD cards. LAN Interface number 00-31 can be used.
[Series 3200 R6.2 (R6.2)]
(4) IP-PAD serial number (CM0A Y=00) must be set according to the accommodated PIM and slot as
follows.
• When accommodated in odd numbered PIM (PIM1/3/5/7)
Continued on next page
IPT INITIAL
IP-PAD INITIAL
SIP INITIAL
VM
LT00
LT01
LT02
LT03
LT04
LT05
LT06
LT07
LT08
LT09
LT10
LT11
PFT
PIM
1/3/5/7
PIM
1/3/5/7
IP-
PAD
No. 2
IP-
PAD
No. 3
VM
LT00
LT01
LT02
LT03
LT04
LT05
LT06
LT07
LT08
LT09
LT10
LT11
PFT
PN-8IPLA
PN-32IPLA/PN-32IPLA-A
IP-PAD No.3
IP-PAD No.2
DECEMBER/02/2005
CM0A
To Next Page
Loading...
