NEC UNIVERGE NEAX 2000 IPS - [Cm49] Digital Announcement Trunk

– 453 – NWA-008844-001 Rev.5.0
91ch3004.fm
COMMAND CODE
TITLE:
DIGITAL ANNOUNCEMENT TRUNK
49
FUNCTION:
This command is used to define the function of each Digital Announcement Trunk (DAT) accommodat-
ed into the system.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
+ 49YY + + + + +
DAT
DATA
NUMBER
EXEST DEDE
TENANT
NUMBER
(2 digits)
(3 digits)
Y
DAT No.
/TENANT No.
SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00 Function of Digital
Announcement
Trunk
000-001:
Built-in DAT of MP
card
002-127:
DAT card number
assigned by CM10/
CM14
01 XX 1st Answering Message of
Automated Attendant
XX: Message No. (00-63)
CM08
CM10/CM14
CM64
CM30 Y=30, 31
02 XX 2nd Answering Message/
Night Message of Auto-
mated Attendant
XX: Message No. (00-63)
05 XX Message on Hold Service
Transfer Trunk Line
XX: Message No. (00-63)
CM48 Y=0
06 XX Transferred Trunk Line
Message Service
(No Answer)
XX: Message No. (00-63)
CM65 Y=50
07 XX Transferred Trunk Line
Message Service (Busy)
XX: Message No. (00-63)
CM65 Y=51
Continued on next page
CM49