NEC UNIVERGE NEAX 2000 IPS - [Cm29] Numbering Plan Tenant Group

– 310 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
NUMBERING PLAN TENANT GROUP
29
FUNCTION:
When each tenant has its own numbering plan in a multiple-tenant system, all the tenants are divided
into four groups. Numbering Plan Group data is then assigned on a tenant basis.
PRECAUTION:
If the data is not assigned (“NONE”), then Numbering Plan Group 0 is used for all tenants.
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE
++ ++
29
DATA
DE
(3 digits)
++
DE
TENANT
NUMBER
(2 digits)
TENANT NUMBER SETTING DATA
RELATED
COMMAND
REMARKS
00
63
Tenant 00
Tenant 63
710 Numbering Plan Group 0 CM20 Y=0
711 Numbering Plan Group 1 CM20 Y=1
712 Numbering Plan Group 2 CM20 Y=2
713 Numbering Plan Group 3 CM20 Y=3
~ ~
CM29